MS-01 Tachometer Digitaler Tachometer mit ABE

Speedometer:

Display Range:       0-199 km/h (0-124 MPH) switchable

Display unit:           1 km/h (MPH)

Speedometer Unit:

Setting range:        km (km/h) – mile (MPH)

Internal and external odometer:

Display range:        0 -99,999 km (mile) return to zero upon exceed

Display unit:           1 km (mile)

Trip meter A – B:

Display range:        0 – 9,999.9 km (mile) return to zero upon exceed

Display unit:           0,1 km (mile)

Over Speed warning:

Setting range:        30 – 199 km/h (19 – 124 MPH)

Warning sign will be given once exceed (included) setting value.

Setting unit:           1 km/h (MPH)

Tire circumference:

Setting range:        300 – 2,500 mm

Setting unit:           1 mm

Induction spot:

Display range:        1 – 40 spot

Gear meter:

Display range: OFF, highest gear, N and highest gear, show all (N/1-6)

Maintenance mileage:

Setting range:        500 – 16,000 km (300 – 10,000 mile)

Setting unit:           100 km (mile)

Stage tachometer:

Display range:        0 – 10,000 RPM / 0 – 13,000 RPM

Display unit:           0 – 10,000 RPM (250 RPM each stage)

                             0 -13,000 RPM (250 RPM each stage)

The RPM input pulse:

Setting range: POSI / NEGA

RPM Signal:

Setting range: P-0,5 / P-1 / P-1,5 / P2 / P2,5 / P3 / P4 / P5 / P6 / P9 / P10 / P11 / P12 /P17 / P18 / P23 / P24 / P34 / P36

First-stage warning for over-running (lit):

Display range:        0 -10,000 RPM

Setting range:        3,000 – 9,750 RPM

Display range:        0 -13,000 RPM

Setting range:        3,000 – 12,750 RPM

Higher than the set value (inclusive), the signaling light for over-running would be lit (green)

Second-stage warning for over-running (Lit)

Display range:        0 – 10,000 RPM

Setting range:        3,000 – 9,750 RPM

Display range:        0 – 13,000 RPM

Setting range:        3,000 – 12,750 RPM

Higher than the set value (inclusive), the signaling light for over-running would be lit (red)

Third-stage warning for over-running (flash):

Display range:        0 – 10,000 RPM

Setting range:        3,250 – 10,000 RPM

Display range:        0 -13,000 RPM

Setting range:        3,250 – 13,000 RPM

Higher than the set value (inclusive), the signaling light for over-running would be flashing (green+red)

Setting unit:           100 RPM

Temperature & Max. temperature record

Display range:

1. OFF /

2. Cylinder head temperature:

P-1     -20 – 200°C (-4 – 392°F)

P-2     -40 – 185°C (-40 – 365°F)

P-3     -20 – 220°C (-4 – 428°F)

P-4     -20 – 200°F (-4 – 392°F)

P-5     -20 – 120°C (-4 – 248°F)

P-6     -30 – 200°C (-22 - 392°F)

P-1A   -20 – 200°C (-4 – 392°F)

P-2A   -40 – 185°C (-40 – 365°F)

P-5A   -20 – 120°C (-4 – 248°F)

P-6A   -30 – 200°C (-22 – 392°F)

3. Temperature sensor

P-250 0 – 250°C (32 – 482°F)

Thermometer unit:

Setting range: °C / °F

Over temp warning:

Setting range:        50 -180°C (122-356°F)

Warning sign will be given once exceeding the setting value.

Setting unit:           5°C (3°F)

Fuel meter:

Setting range: OFF / 100 Ohm / 250 Ohm / 270 Ohm / 390 Ohm / 510 Ohm / 1200 Ohm / fuel switch / USER

Low fuel warning:

Setting range:        0 – 3 division

When lower than (including) setting value, fuel level symbol will blink.

Setting unit:           1 division

Clock:

Setting range:        1:00 – 12:59 (12h)

Voltmeter:

Display range:        8,0 – 18,0 V

Display unit:           0,1 V

Under voltage warning:

Setting range:        8,0 V – 13,0 V

Warning sign will be given once below (included) setting value.

Setting unit:           0,1 V

Backlight brightness:

Setting range: 1-5 (darkest) – 5-5 (brightest)

ABS:

Setting range: ON / OFF

AFR:

Setting range: ON / OFF

Lean setting:

Display range:        12,1 – 17,5

Display unit:           0,1

Operating Voltage:

DC 12 V

Temperature range:

-10 - +60°C

Specifications:

JIS D 0203(S2)

Meter Size:

128 x 98 x 48,8 mm

Weight:

About 200 g

Indication light:

ABS                                (yellow)

High beam light               (blue)

Turn signal                      (green)

Engine warning light         (yellow)

Neutral                           (green)

Warning light / IMMO       (red)